Radio

U0200-LOST COMMUNICATION WITH PASSENGER DOOR MODULE



- When Monitored:
Continuously when the ignition is on.

Battery voltage between 10 and 16 volts.

Ignition Off Draw (IOD) fused installed.

Totally Integrated Power Module (TIPM) is configured correctly.

- Set Condition:
Bus messages not received from the Passenger Door Module (PDM) for approximately two to five seconds.





VERIFY DTC IS ACTIVE

NOTE: Make sure the IOD fuse is installed and the battery is fully charged before proceeding.

1. Turn the ignition on.
2. With the scan tool, read the active DTCs.

Is this DTC active?

Yes

- Body Verification Test

No

- Stored Lost Communication DTCs Perform the Stored Lost Communication DTCs diagnostic procedure.