Cylinder Head Assembly: Specifications

CYLINDER HEAD






Tighten the cylinder head bolts in four steps using the sequence shown:

Step 1: Tighten bolts 1-10 34 Nm (25 ft. lbs.) and
bolts 11-15 20 Nm (15 ft. lbs.)
Step 2: Tighten bolts 1-1 0 54 Nm (40 ft. lbs.) and
verify bolts 11-15 20 Nm (15 ft. lbs.)
Step 3: Rotate bolts 1-10 an additional 90°
Step 4: Tighten bolts 11-15 34 Nm (25 ft. lbs.)


INTAKE MANIFOLD
Intake Manifold - Installation

EXHAUST MANIFOLD
Exhaust Manifold - Installation

CAMSHAFT GEAR/SPROCKET
Engine Torque Specifications

SURFACE VARIATION
Cylinder Head - Inspection