EBL Status Indicator Flashing

EBL STATUS INDICATOR FLASHING

For a complete wiring diagram refer to the Wiring Information Electrical Diagrams





HVAC DOOR RECALIBRATION NEEDS TO BE RUN

NOTE: The EBL status indicator can flash at two different rates, twice per second (fast rate) when the control is indicating that the HVAC Door Recal needs to be run, and once every two seconds (slow rate) when the HVAC Door Recal is in progress.

NOTE: When the EBL status indicator is flashing, it will not indicate EBL operating status. However, the EBL switch will continue to function normally.

NOTE: When the EBL status indicator is flashing, the A/C status indicator will not function. However, the A/C switch will continue to function normally.

1. With the scan tool, actuate the HVAC Door Recalibration Test.

Does the scan tool display: Recalibration Test Passed?

Yes

- Test Complete.

No

- Diagnose and repair the DTC(s).
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test.