Seat Back - Installation

INSTALLATION





1. Install the seat back and recliners onto the seat cushion and install the bolts (2). Tighten the bolts to 28 Nm (21 ft. lbs.).
2. Connect recliner cable (5) to the recliner on both sides of the seat.





3. Position the seat cushion cover flaps back and install the recliner handle (4) and screw (3).
4. Install the seat into vehicle Seat - Installation.

WARNING: Do not connect the battery negative cable Component Tests and General Diagnostics . Serious or fatal injury may result if the system test is not performed first.

5. Place battery access cover into place and install four bolts.
6. Close deck lid.