Instrument Panel Cover - Installation

INSTALLATION

WARNING: Follow all Warnings for airbag component service Service Precautions .

1. Place instrument panel cover/pad into position and install twelve screws, two bolts, and one electrical connector to instrument panel cover/pad.
2. Install the right lower instrument panel trim. Instrument Panel Lower Right Trim Panel - Installation
3. Install two screws and one electrical connector to low tire pressure module.
4. Install two screws and one electrical connector to remote keyless entry module.
5. Install five screws and two electrical connectors to the instrument cluster gauge pack.
6. Install four screws and two electrical connectors to the instrument cluster.
7. Install the instrument panel. Instrument Panel - Installation
8. Connect the battery negative cable.
9. Place battery access cover into place and install four bolts.
10. Verify vehicle and system operation.