Hinge - Installation

INSTALLATION





1. Position decklid hinge (2) on vehicle.
2. Position any shims retrieved during removal between the hinge and the trunk pad. Install bolts attaching hinge to trunk pan (3) and tighten to 28 Nm (21 ft. lbs.).
3. Loosely install bolts attaching the hinge to the decklid (1).
4. Align the hinge marks made on the decklid.
5. Tighten the bolts attaching hinge to the decklid to 28 Nm (21 ft. lbs.).
6. Verify decklid operation and alignment and adjust if necessary.
7. Install splash shields.
8. Install rear wheels and tighten to specified torque. Tires and Wheels - Installation.