EEPROM Checksum Failure

EEPROM CHECKSUM FAILURE

For a complete wiring diagram, refer to the Wiring Information Electrical Diagrams

- When Monitored:
With the ignition On.

- Set Condition:
The Instrument Cluster detects EEPROM failure during the internal self check.





INSTRUMENT CLUSTER
1. Turn the ignition on.
2. With the scan tool, record and erase DTCs.
3. Turn the ignition off, wait 15 seconds, then turn the ignition on.
4. With the scan tool, read DTCs.

Did the Checksum DTC reset?

Yes

- Replace the Instrument Cluster.
- Perform the BODY VERIFICATION TEST. Body Verification Test

No

- Test Complete.