31 PCI BUS Internal Hardware Failure

31 - PCI BUS INTERNAL HARDWARE FAILURE

For a complete wiring diagram, refer to the Wiring Information Electrical Diagrams

- When Monitored:
Continuously.

- Set Condition:
The same PCI Bus message can not be transmitted within 90ms. DTC will mature immediately.





PCI INTERNAL FAULT
1. Connect the scan tool to the Data Link Connector.
2. Turn the ignition on.
3. With the scan tool, erase DTCs.
4. Turn the ignition off then turn the ignition on.
5. With the scan tool, read DTCs.

Is this DTC active?

Yes

- Replace the module which set the DTC.
- Perform the BODY VERIFICATION TEST. Body Verification Test

No

- Test Complete.