06 Internal BCM Failure

06-INTERNAL BCM FAILURE

For a complete wiring diagram, refer to the Wiring Information Electrical Diagrams.

- When Monitored:
Continuously.

- Set Condition:
The Body Control Module (BCM) detects an internal fault.





REPLACE THE BODY CONTROL MODULE IF DTC IS ACTIVE
1. With the scan tool, read the active DTCs.

Does the scan tool display this DTC as active?

Yes

- Replace and program the Body Control Module.
- Perform the BODY VERIFICATION TEST. Body Verification Test

No

- If the DTC is stored, check for an intermittent condition. Visually inspect the related wiring harness connectors. Look for broken, bent, pushed out, or corroded terminals.
- Perform the BODY VERIFICATION TEST. Body Verification Test