Exhaust Manifold - Installation

INSTALLATION

EXHAUST MANIFOLD - LEFT SIDE





1. Install the exhaust manifold gasket and the exhaust manifold.
2. Using the sequence shown, install the exhaust manifold bolts and tighten to 31 Nm (23 ft. lbs.).
3. Install the coolant bottle.





4. Install the air cleaner housing (1).
5. Install the knock sensor.
6. Install the exhaust pipe to manifold bolts.
7. Connect negative battery cable.

EXHAUST MANIFOLD - RIGHT SIDE





1. Install the exhaust manifold gasket and the exhaust manifold.
2. Using the sequence shown, install the exhaust manifold bolts and tighten to 31 Nm (23 ft. lbs.).
3. Connect the wire harness mounted on the right hand inner fender panel.
4. Install the power distribution box mounting bracket.
5. Install the power distribution box.





6. Install the starter (1) and heat shield (4).
7. Install the knock sensor.
8. Install the exhaust pipe to manifold bolts.
9. Connect the negative battery cable.