Crankshaft - Removal

REMOVAL





1. Remove engine.
2. Remove the vibration damper with a puller (1) Vibration Damper - Removal.





3. Remove flywheel.
4. Remove the rear oil seal retainer Crankshaft Rear Oil Seal Retainer - Removal.
5. Remove the oil pan Engine Oil Pan - Removal.
6. Remove the oil pump pickup.
7. Remove the windage tray/oil pan gasket.





8. Remove the timing chain cover Engine Timing Cover(s) - Removal.





9. Remove the oil pump Removal and Replacement





10. Remove the timing chain (1) and cam sprocket (2) Timing Chain & Sprockets - Removal.





11. Identify rod bearing caps and rods before removal. Remove rod bearing caps with bearings.





12. Identify main bearing caps (1) prior to removal.
13. Remove main bearing caps (1) and bearings one at a time.





14. Remove the thrust bearings.
15. Remove the crankshaft out of the block.