Checking a No Crank Condition

CHECKING A NO CRANK CONDITION

For a complete wiring diagram, refer to the wiring information Electrical Diagrams.
NO CRANK CONDITION

NOTE: Diagnose and repair DTC B2229-SKREEM Internal - SKIM Immobilizer before continuing.

NOTE: Diagnose and repair any Totally Integrated Power Module (TIPM) DTCs before continuing.

NOTE: Make sure the gear selector is in the Park or Neutral position.

NOTE: Insect all fuses for opens.

NOTE: The battery must be fully charged and in good condition. An undercharged battery may produce invalid test results.

1. Attempt to start the engine.

Does the starter turn the engine over?

Yes

- Test complete.

No

- Component Tests and General Diagnostics Perform the appropriate procedure.