Removal

REMOVAL

NOTE: Note: It is not necessary to discharge the refrigerant system to replace the A/C low pressure switch.





1. Disconnect and isolate the negative battery cable.
2. Raise and support the vehicle.
3. Remove the right front wheel Tires and Wheels - Removal.
4. Remove the right inner fender splash shield Front Wheelhouse Splash Shield - Removal.
5. Disconnect the wire harness connector (1) from the A/C low pressure switch (2) located on the top of the A/C accumulator (3).
6. Remove the A/C low pressure switch from the A/C accumulator and remove and discard the O-ring seal.