Tire Pressure Monitoring (TPM) Module - Installation

INSTALLATION





1. Place TPM module (1) on instrument panel. Align the mounting holes.
2. Install the mounting screws.
3. Connect the wiring harness connector to the TPM module.
4. Install the instrument cluster gauge pack (2) and all components removed to access it. Gauge Pack - Installation
5. Program the identification code from each tire pressure sensor into the new TPM module. Testing and Inspection
6. Verify that the module has been programmed with the identification code of all four of the tire pressure sensors using the scan tool. Also check the tire pressure value from each tire pressure sensor. If these are present in the receivers memory, the receiver has been correctly programmed.
7. Road test the vehicle to verify the proper function of the tire pressure monitoring system.