Pressure Hose

INSTALLATION

NOTE: Before installing power steering hose, replace used O-rings as necessary. Clean hose ends and open ports with a lint-free cloth. Lubricate O-rings with clean power steering fluid.





1. Install power steering pressure hose (1) in steering gear fluid port. Tighten pressure hose tube nut to 28 Nm (21 ft. lbs.).




2. Install power steering pressure hose (2) in power steering pump (1) pressure fitting. Tighten pressure hose tube nut to 28 Nm (21 ft. lbs.).
3. Install air cleaner. Air Cleaner Housing
4. Connect the battery negative (-) cable to battery negative battery terminal.
5. Fill and bleed power steering system. Service and Repair
6. Check for leaks.