Removal

REMOVAL





1. Open deck lid.
2. Remove four bolts to battery compartment cover and remove cover.
3. Disconnect and isolate the battery negative cable.

WARNING: Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components. Failure to do this may result in serious or fatal injury.

4. Remove the upper and lower steering column shrouds Steering Column - Removal.
5. Disconnect the one wiring connector (2) to the halo lamp (1).
6. Unclip the halo lamp (1) from the ignition lock cylinder by prying the two retaining clips (3) out and pull off to remove.