Intake Manifold: Specifications

INTAKE MANIFOLD TORQUE AND SEQUENCE





Tighten bolts to 12 Nm (106 in. lbs.) as shown.

PLENUM COVER





Plenum cover bolts as shown 10 Nm (89 in. lbs.)

THROTTLE BODY TORQUE AND SEQUENCE





CAUTION: DO NOT OVER TORQUE. Over tightening can cause damage to the throttle body, gaskets, bolts and/or the intake manifold. The throttle body must be torqued in a mandatory torque sequence. Tighten in a criss - cross pattern to specification.

Tighten the throttle body bolts (3) in a mandatory torque criss - cross pattern sequence to 8 Nm (71 in. lbs.).