Installation

INSTALLATION

WARNING: Follow all Warnings for airbag component service Service Precautions.

1. Install five screws to instrument panel right lower trim.
2. Install three screws retaining glove box assembly.
3. Connect one electrical connector on cluster bezel, place in position over retaining slots and firmly snap into place.
4. Connect one electrical connector to instrument panel center bezel and install six screws to center bezel.
5. Connect one electrical connector to center console, place into position and install eight screws to console.
6. Install floor console bezel and parking brake body.
7. Install shifter shaft with knob and body.
8. Install six allen screws to shifter bezel.
9. Connect the battery negative cable.
10. Place battery access cover into place and install four bolts.
11. Close deck lid.
12. Verify vehicle and system operation.