Power Windows: 48

48-DRIVER WINDOW SWITCH STUCK UP

For a complete wiring diagram Consult Diagrams/Electrical

- When Monitored:
Whenever the ignition is in the Run or Accessory position.

- Set Condition:
When the switch input is active for over 10 seconds.





Diagnostic Test

1. DTC PRESENT
Turn the ignition on.
With the scan tool, erase DTCs.
Cycle the ignition switch from Off to Run.
With the scan tool, read DTCs.
Does the scan tool display 48-DRIVER WINDOW SWITCH STUCK UP?

Yes

- Replace the Window Switch.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test

No

- The condition that caused the code to set is not present at this time. Operate the switch several times to ensure it does not stick. If the switch ever sticks, replace it.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test