Gateway Internal (Gateway Module)

GATEWAY INTERNAL (GATEWAY MODULE)





For a complete wiring diagram Consult Diagrams/Electrical.

- When Monitored:
Continuously.

- Set Condition:
Gateway module detects an internal fault.





Diagnostic Test

1. REPLACE THE GATEWAY MODULE IF DTC IS ACTIVE
With the scan tool, read the active DTC's.
Does the scan tool display this DTC as active?

Yes

- Replace and program the Gateway Module.
- Perform the BODY VERIFICATION TEST - VER 1.Body Verification Test.

No

- If the DTC is stored, check for an intermittent condition. Visually inspect the related wiring harness connectors. Look for broken, bent, pushed out, or corroded terminals.