Communications - Numeric Codes: 34

34-COUNTRY CODE NOT PROGRAMMED

For a complete wiring diagram Consult Diagrams/Electrical

- When Monitored:
Continuously.

- Set Condition:
The BCM does not learn the country code within 10 seconds.





Diagnostic Test

1. SET CORRECT COUNTRY CODE
Turn the ignition on.
With the scan tool, select ECU View.
Select the correct country code for the vehicle.
With the scan tool, erase BCM DTC's.
Cycle the ignition switch off then on and wait approximately i minute.
Select the correct country code for the vehicle
Does this DTC reset?

Yes

- Replace/update the Body Control Module (BCM).
- Perform the BODY VERIFICATION TEST - VER 1. Body Verification Test.

No

- Repair complete.
- Perform the BODY VERIFICATION TEST - VER 1. Body Verification Test.