06

06-INTERNAL BCM FAILURE

For a complete wiring diagram Consult Diagrams/Electrical.

- When Monitored:
Continuously.

- Set Condition:
The Body Control Module (BCM) detects an internal fault.





Diagnostic Test

1. REPLACE THE BODY CONTROL MODULE IF DTC IS ACTIVE
With the scan tool, read the active DTC's.
Does the scan tool display this DTC as active?

Yes

- Replace and program the Body Control Module.
- Perform BODY VERIFICATION TEST - VER 1.Body Verification Test.

No

- If the DTC is stored, check for an intermittent condition. Visually inspect the related wiring harness connectors. Look for broken, bent, pushed out, or corroded terminals.