Engine Cooling Radiator - Installation

INSTALLATION





1. Position the radiator into engine compartment. Seat the radiator assembly lower rubber isolators into the mounting holes in radiator lower support.
2. Install the radiator mounting brackets (1) and bolts (2). Tighten to 12 Nm (106 in. lbs.).
3. Position condenser on the radiator and install the upper mounting bolts. Tighten bolts to 6 Nm (50 in. lbs.).
4. Raise and support the vehicle.










5. Install lower condenser mounting bolts. Tighten bolts to 10 Nm (88 in. lbs.)
6. Install lower radiator hose (1) and clamp.
7. Lower vehicle.










8. Install the radiator fan assemblyCooling Fan - Installation.
9. Install the upper radiator hose. Align the hose so it does not interfere with the accessory drive belt or the engine. Position the hose clamp so it will not interfere with the hood.
10. Install the upper radiator closure panels.
11. Connect the negative battery cable.
12. Fill the cooling system with coolant Service and Repair.
13. Operate the engine until it reaches normal operating temperature. Check the cooling system and automatic transmission for correct fluid levels.