Installation

INSTALLATION




1. Exchange the accessory drive belt pulley if necessary. Tighten bolt to 61 Nm (45 ft.lbs.).
2. Install upper front timing belt cover.
3. Install lower timing belt front cover.
4. Tighten the timing cover bolts as follows:
- M6 bolts - 12 Nm (105 in.lbs.)
- M8 bolts - 28 Nm (250 in.lbs.)
- M10 bolts - 54 Nm (40 lbs.ft.)
5. Install power steering pump fasteners. Tighten bolts to 23 Nm (200 lbs. in.).
6. Install crankshaft damper.
7. Install accessory drive belt tensioner. Torque fastener to 28 Nm (250 in. lbs.).
8. Install accessory drive belt.
9. Lower vehicle.
10. Connect negative battery cable.