Sensor-Auto Headlamp

AUTO HEADLAMP SENSOR

REMOVAL




1. Disconnect and isolate the battery negative cable.
2. Remove the defroster grille.




3. Using a trim stick (special tool #C-4755) or equivalent, gently pry up on the auto headlamp sensor (1).
4. Pull the sensor from the top of the instrument panel.
5. Disconnect the one electrical connector.

INSTALLATION




1. Connect the one electrical connector.
2. Position the auto headlamp sensor (1) in instrument panel and press firmly down to snap into place.




3. Install the defroster grille.
4. Connect the battery negative cable.