Air Cleaner Housing: Service and Repair

HOUSING-AIR CLEANER

REMOVAL





1. Separate the air inlet duct (5) at the element housing (6).
2. Disconnect the CCV hose (2) at the element housing (6).
3. Remove the housing retaining bolt (1).
4. Pull housing up and off of the locating pin.
5. Remove element housing (6) from vehicle.

INSTALLATION





1. Align the housing (6) with the lower air inlet duct and alignment grommet in the wheel housing.
2. Properly fit the housing (6) and install housing retaining bolt (1).
3. Connect the inlet air duct (5) to the housing (6) and tighten clamp.
4. Connect the CCV hose (2) to housing.