Side View Mirror

MIRROR-SIDE VIEW

REMOVAL




1. Disconnect and isolate the negative battery cable.
2. Remove the trim panel from the inside of the front door.
3. Remove the two push pins (2) that secure the window trim molding (1) to the front door.
4. Remove the window trim molding to gain access to the mirror fasteners.




5. Disconnect the door wire harness connector (4) from the mirror electrical connector (2).
6. Remove the three nuts (1) that secure the outside rearview mirror (3) to the front door.
7. Remove the outside rearview mirror from the front door.

INSTALLATION




1. Position the outside rearview mirror (3) to the front door.
2. Install the three nuts (1) that secure the mirror to the front door. Tighten the nuts to 7 N.m (60 in.lbs.).
3. Connect the door wire harness connector (4) to the mirror electrical connector (2).




4. Install the window trim molding (1) onto the front door.
5. Install the two push pins (2) that secure the window trim molding to the front door.
6. Install the trim panel to the inside of the front door.
7. Reconnect the negative battery cable.