Trunk / Liftgate Stop: Service and Repair
BUMPERREMOVAL
LOWER
1. Open the deck lid.
2. Remove the push-pin fastener (1) that secures the lower bumper (2) to the rear fascia flange that extends over the deck opening lower panel.
3. Remove the bumper.
UPPER
1. Open the deck lid.
2. Unscrew the upper bumper (2) from the lower flange of the deck lid inner panel (1).
INSTALLATION
LOWER
1. Position the lower bumper (2) to the rear fascia flange that extends over the deck opening lower panel.
2. Secure the bumper with a push-pin fastener.
3. Close the deck lid.
UPPER
1. Screw the upper bumper (2) into the hole in the lower flange of the deck lid inner panel (1).
2. Thread the bumper in or out of the deck lid as necessary to achieve proper deck lid closing and alignment.
3. Close the deck lid.