Tail Lamp: Service and Repair

TAIL LAMP UNIT

REMOVAL




1. Disconnect and isolate the battery negative cable.
2. From inside the trunk, peel back the trunk trim and disconnect the electrical connector.




3. Remove the three plastic wing nuts (3).
4. Pull the tail lamp unit (1) straight out of the rear of the quarter trim panel.

INSTALLATION




1. Position the tail lamp unit (1) in the rear quarter panel of vehicle.
2. Install and tighten the three plastic wing nuts (3).




3. From within the trunk, connect the electrical connector (1) to tail lamp unit (2).
4. Replace trunk carpeting.
5. Connect the battery negative cable.