Headlamp Unit

HEADLAMP UNIT

REMOVAL




1. On Charger models, the fascia must first be removed to gain access for the removal of headlamp unit and fasteners.




2. Disconnect and isolate the battery negative cable.
3. Open hood and remove the two upper headlamp unit mounting screws.




4. The two upper retaining screws (1) are located just in front of the upper radiator cross-member.




5. Remove the one lower headlamp unit retaining screw.




6. Disconnect the electrical connectors.
7. Separate headlamp unit from vehicle.

INSTALLATION




1. Position the headlamp unit in the opening in the headlamp mounting cross-member.
2. Connect the electrical connector.




3. Install the one lower headlamp unit retaining screw.




4. Install the two upper retaining screws (1).




5. Install front fascia.
6. Connect the battery negative cable.