Air Cleaner Housing: Service and Repair
AIR CLEANER HOUSINGREMOVAL
1. Disconnect clean air hose from air cleaner housing (Fig. 17).
2. Disconnect ambient air temperature sensor (Fig. 17).
3. Remove turbocharger solenoid bracket mounting screws (Fig. 17). Reposition turbocharger solenoid bracket.
4. Disconnect make-up air hose from the side of air cleaner housing.
5. Dislodge wiring harness clips on the side of the air cleaner housing.
6. Remove air cleaner housing mounting screw and nut (Fig. 17).
7. Pull air cleaner housing straight up to remove.
INSTALLATION
1. Install air cleaner housing. Make sure that it is on the battery tray tab in the back and on the stud on the side.
2. Install the nut and screw for air cleaner housing (Fig. 17). Tighten fasteners to 7.3 Nm (65 in. lbs.).
3. Insert wiring harness clips on the side of the air cleaner housing.
4. Connect make-up air hose to the side of air cleaner housing.
5. Install turbocharger solenoid bracket mounting screws (Fig. 17).
6. Connect ambient air temperature sensor (Fig. 17).
7. Connect clean air hose to air cleaner housing (Fig. 17).