Inner Belt Weatherstrip

INNER BELT WEATHERSTRIP

REMOVAL

1. Remove door trim panel.
2. Remove push pin fasteners attaching the leading edge of the inner belt weatherstrip to the inner door panel.

Fig. 4:

3. Pull upward on leading edge of inner belt weatherstrip and disengage weatherstrip from flange on door panel (Fig. 4).
4. Pull weatherstrip from the door panel.
5. Remove inner belt weatherstrip from vehicle.

INSTALLATION

1. Position inner belt weatherstrip to vehicle.
2. Position rearward edge of weatherstrip tight against the rear door glass run channel.
3. Push downward on trailing edge of inner belt weatherstrip and engage weatherstrip to flange on the door panel.
4. Push weatherstrip onto the door panel flange.
5. Install push pin fasteners attaching the leading edge of the inner belt weatherstrip to the inner door panel.
6. Install door trim panel.