Liftglass Ajar Switch

Fig. 3 Liftglass Ajar Switch Location:

REMOVAL
The Liftglass Ajar Switch is located on the left liftglass support cylinder (Fig. 3).
1. Remove three torx screws attaching the switch to the cylinder.
2. Remove left rear quarter trim panel. Refer to Body, Interior, Quarter Trim Panel-Coupe, Removal.
3. Disconnect liftglass ajar switch connector.
4. Remove switch from vehicle.

INSTALLATION
1. Position the switch in the vehicle.
2. Connect the switch wire harness connector.
3. Install left rear quarter trim panel. Refer to Body, Interior, Quarter Trim Panel-Coupe, Installation.
4. Install the three torx screws attaching the switch to the cylinder.