Dimmer Switch: Service and Repair
PANEL DIMMER SWITCHREMOVAL
Use care not to mar the instrument panel bezel.
1. Use a trim stick (special tool # C-4755) or equivalent, and insert at top or bottom of switch. Gently pry out on switch.
2. Apply pressure at the top and bottom of the switch to rock it from the instrument panel bezel.
3. Disconnect the wire connector and remove switch from vehicle.
INSTALLATION
Use care not to pinch the wires, mar, or scratch the instrument panel cover.
1. Connect the wire connector.
2. Push the switch back into the instrument panel bezel till it is in its lock in position.