Fuel Filter: Service and Repair

REMOVAL
The fuel filter mounts inside the fuel pump module and is a non-serviceable part.
1. Disconnect the positive battery cable at the PDC.
2. Release fuel pressure, refer to the fuel release procedure in this section.
3. Raise vehicle and support.
4. Remove fuel tubes from fuel filter. Refer to quick-connect fittings in this section.

Fig. 1 Fuel Filter:

5. Remove the fuel filter mounting bolt (Fig. 1).
6. Remove the fuel filter from mounting clamp.

INSTALLATION
1. Install the fuel filter from mounting clamp.
2. Install the fuel filter mounting bolt.
3. Install fuel tubes to fuel filter. Refer to quick-connect fittings in this section.
4. Lower vehicle.
5. Connect the positive battery cable at the PDC.