Seats: Service and Repair
SEATREMOVAL
1. Set seat position to full rear position.
Fig. 1:
2. Remove bolts attaching front of seat track to floor crossmember (Fig. 1).
3. Set seat position to full forward position.
4. Remove nuts attaching rear of seat track to floor crossmember.
5. Lift seat upward and out of vehicle.
INSTALLATION
1. Position seat in vehicle.
2. Set seat position to full forward position.
3. Install nuts attaching rear of seat track to floor crossmember.
NOTE: Tighten the set retaining nuts to 28 N.m (250 in. lbs.) torque.
4. Set seat position to full rear position.
5. Install bolts attaching front of seat track to floor crossmember.
NOTE: Tighten the set retaining bolts to 28 N.m (250 in. lbs.) torque.