Bulkhead Trim Panel
BULKHEAD TRIM PANELREMOVAL
REMOVAL - COUPE
1. Remove center console as necessary to access lower portion of bulkhead trim panel.
2. Move seats to forward position.
3. Remove seat belt anchor bolts.
Fig. 1:
4. Remove screws attaching bulkhead trim panel to bulkhead (Fig. 1).
5. Disconnect switch at alarm lock cylinder.
6. Remove trim panel from vehicle.
REMOVAL - ROADSTER
1. Remove center console rear attachment screws.
2. Move seats to the forward position.
3. Remove speaker.
4. Disconnect switch at alarm lock cylinder.
5. Remove seat belt anchor bolts.
Fig. 2:
6. Remove screws attaching bulkhead trim panel to bulkhead (Fig. 2).
7. Remove trim panel from bulkhead.
INSTALLATION
INSTALLATION - COUPE
1. Position trim panel in vehicle.
2. Connect switch at alarm lock cylinder.
3. Install screws attaching bulkhead trim panel to bulkhead.
4. Install seat belt anchor bolts.
5. Install center console.
INSTALLATION - ROADSTER
1. Position trim panel to bulkhead.
2. Install screws attaching bulkhead trim panel to bulkhead.
3. Install seats belt anchor bolts.
4. Connect switch at alarm lock cylinder.
5. Install speaker.
6. Install center console rear attachment screws.