Console: Service and Repair

CENTER CONSOLE

REMOVAL

1. Remove ash receiver.
2. Remove instrument panel center bezel.

Fig. 4:

3. Remove gear shift handle (Fig. 4).
4. Set parking brake.
5. Remove screws attaching center console to instrument panel below heater control.
6. Remove screws attaching rear of console to floor tunnel.
7. Remove center console cover from vehicle.

INSTALLATION

1. Position center console cover to vehicle.
2. Install screws attaching rear of console to floor tunnel.
3. Install screws attaching center console to instrument panel below heater control.
4. Install gear shift handle.
5. Install instrument panel center bezel.
6. Install ash receiver.