Fuel Tank Closeout Panel

FUEL TANK CLOSEOUT PANEL

REMOVAL

NOTE: The Viper, Coupe does not have a Fuel Tank Closeout Panel. To remove fuel tank a hole will have to be cut in the trunk pan. Refer to the templet that comes with the closeout panel and using a suitable cutting tool, to cut the trunk pan. For installation of panel refer to Closeout Panel Installation Procedures.

1. Release trunk latch and open decklid.
2. Support deck lid on prop rod.
3. Remove spare tire from trunk.

Fig. 5:

4. Using a suitable drill with a 3 mm (0.125 in.) drill bit, remove pop rivets attaching fuel tank closeout panel to trunk pan (Fig. 5).
5. Pull closeout panel rearward to separate sealed edge around perimeter of opening in trunk pan.
6. Remove closeout panel from vehicle.

INSTALLATION

1. Position closeout panel to vehicle.
2. Apply a bead of Mopar(R) Silicone Rubber Adhesive Sealant, or equivalent, around perimeter of fuel tank closeout panel.
3. Push closeout panel forward to opening in trunk pan.
4. Install pop rivets attaching fuel tank closeout panel to trunk pan.
5. Install spare tire.