Disarming System Using the VTSS Disarm Switch

VTSS DISARM SWITCH
The VTSS Disarm Switch is located in the top of the storage box in the center of the rear bulkhead trim panel. The VTSS Disarm Switch is hardwired into the wire harness and is not serviced separately.

To disarm the system using the VTSS disarm switch:
1. Open the liftglass with the ignition key.

NOTE: The alarm will now be triggered until the disarm switch is activated.

2. Reach in through the liftglass opening and pull down on the manual door latch lever to open the door.
3. Insert the key and turn to disarm the system.