Removal and Replacement
REMOVAL1. Make sure ignition switch is in OFF position and all accessories are turned OFF.
2. The battery is located behind the left rear wheel well splash shield. Remove left rear tire and wheel.
3. Remove the seven screws attaching the rear wheel splash shield.
4. Disconnect the battery cables from the battery terminals. Remove the battery negative cable first
Fig. 12 Battery Hold-Down/Tray:
5. Remove the battery hold down clamp (Fig. 12) and remove the battery from the vehicle.
INSTALLATION
1. Position the battery in the battery tray.
2. Install the battery holdown clamp and bolt. Torque the bolt to 14 Nm (124 in. lbs.).
3. Connect the battery POSITIVE cable.
4. Connect the battery NEGATIVE cable.
5. Install the left rear wheel splash shield.
6. Install the left rear wheel.