Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com

Headlamp Switch: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the knee blocker right and left sides.
3. Remove headlamp switch knob. Using a stiff wire or a small tool, insert it into the hole at the bottom of the knob. Pushing up with the tool and gently pull rearward till the lock tab releases the knob. Remove knob. Use care not to break the locking tab.
4. Remove instrument panel center bezel. Disconnect the cigar lighter, power window switch, and rear window defogger switch (if equipped) wire connectors.
5. Remove the steering column shroud and it may require lowering of the steering column for additional clearance.
6. Remove instrument panel bezel.
7. Remove headlamp switch by depressing the locking tabs.
8. Remove switch and disconnect wire connector.

INSTALLATION
1. Connect wire connector to switch.
2. Install headlamp switch.
3. Install instrument panel bezel.
4. Place the steering column into position (if lowered), and install the steering column shroud.
5. Install instrument panel center bezel.
6. Insert headlamp switch knob.
7. Install the knee blocker right and left sides.
8. Connect the battery negative cable.