Refrigerant Pressure Sensor / Switch: Service and Repair

REMOVAL
1. Open the vehicle hood.
2. Disconnect the negative battery cable.
3. Using a refrigerant recovery machine, remove refrigerant from the A/C system.

Fig. 8 Dual Pressure Switch:

4. Remove the dual pressure switch connector located atop the filter-drier beside the cowl air inlet.
5. Using an appropriate size socket, remove the dual pressure switch.

Fig. 9 Dual Pressure Switch:

INSTALLATION
1. Using an appropriate size socket install the dual pressure switch.
2. Install the dual pressure switch connector located atop the filter-drier beside the cowl air inlet.
3. Connect the battery negative cable.
4. Evacuate the refrigerant system.
5. Recharge the refrigerant system.
6. Close the vehicle hood.