Rear Clutch

DISASSEMBLY








1. Remove rear clutch snap ring (Fig. 120) (Fig. 126).





2. Remove rear clutch pack (Fig. 121).





3. Remove piston/belleville snap ring (Fig. 122).






4. Remove rear clutch piston and belleville spring (Fig. 123).








5. Remove input shaft-to-clutch retainer snap ring (Fig. 124) (Fig. 125). Press input shaft out of retainer if necessary.

ASSEMBLY








1. Install input shaft-to-clutch retainer snap ring (Fig. 127) (Fig. 128) (Fig. 126).








2. Install rear clutch piston, belleville spring and waved snap ring (Fig. 129). Install snap ring using a suitable screwdriver (Fig. 130).





3. Install rear clutch pack (Fig. 131).





4. Install snap ring using a suitable screwdriver (Fig. 132).





5. Using feeler gauges, measure rear clutch clearance (Fig. 133). Rear clutch clearance should be within 0.71 - 1.10 mm (0.028 - 0.043 inch).