Skip Shift Solenoid

SKIP SHIFT SOLENOID - PCM OUTPUT

Fig. 9 Vehicle Speed Sensor, Skip Shift Solenoid And Reverse Lockout Solenoid:

The skip shift solenoid prevents the operator from shifting into second or third gear during certain conditions. The PCM controls the skip shift solenoid (Fig. 9). The PCM locks out second and third gear when all of the following conditions are met:
- Engine coolant temperature exceeds 41 °C (106 °F)
- Vehicle speed is between 12 - 18 mph
- Engine speed above 608 rpm
- The PCM verified first gear speed/rpm
- Throttle position sensor (TPS) signal is less than 0.068 volt above closed throttle (23 % throttle opening)

The solenoid resets when vehicle speed drops below 2 mph.