Upper Control Arm

Inspect the upper control arm for the following:
- Inspect the upper control arm for any signs of damage. If the control arm shows any sign of damage the upper control arm must be replaced. Do not attempt to repair or straighten a broken or bent upper control arm.
- Inspect the upper control arm pivot bar for any signs of damage. Do not attempt to repair or straighten a broken or bent upper control arm pivot bar.
- Inspect both control arm isolator bushings for severe deterioration. These bushings can be serviced separately.
- Inspect the ball joint per the procedure.
- Inspect the ball joint grease seal (boot) for cuts or splits. It can be serviced separately.