Throttle Cable Replacement

REMOVAL
1. Disconnect cable from throttle cam.
2. From inside the vehicle, hold the accelerator pedal up and remove the cable retainer and throttle cable from pedal.
3. Squeeze the tabs on the retainer at the dash panel. Push the retainer out of the dash panel. Remove the cable assembly.

INSTALLATION
1. Insert cable assembly through opening in dash panel. Seat cable retainer in dash panel.
2. From inside the vehicle, hold up the pedal and install the throttle cable and cable retainer in the upper end of the pedal shaft.
3. Connect the throttle cable to the driver side throttle body. Slide the cable end into the throttle arm cam.
4. Push cable into retaining clip.