Carpet

CARPET

REMOVAL

1. Remove door sill trim panels.
2. Remove seat cushions.
3. Remove seats.
4. Remove seat belt buckles.
5. Remove bulkhead trim panel.
6. Remove quarter trim panels.
7. Remove center console.

Fig. 3:

8. Pull carpet from adhesive on bulkhead (Fig. 3).
9. Separate carpet from vehicle.

INSTALLATION

1. Using a flat bladed scraper, remove old adhesive from bulkhead, if necessary.
2. Paint bulkhead to avoid corrosion, if necessary.
3. Apply adhesive on bulkhead panel in pattern shown (Fig. 3).
4. Position carpet in vehicle.
5. Push carpet to adhesive on bulkhead.
6. Install center console.
7. Install quarter trim panels.
8. Install bulkhead trim panel.
9. Install seat belt buckles.
10. Install seats.
11. Install seat cushions.
12. Install door sill trim panels.