Torque Specifications
| Main Bearing Cap Bolts | Step 1 Tighten Center Main Bearing Caps In Sequence Order Shown This will seat the main bearing caps onto the engine block | 15 |
| Steps 2a, b and c must be followed to ensure thrust bearing alignment | ||
| Step a Move crankshaft all the way to the rear of its travel | ||
| Step b Move crankshaft all the way to the front of its travel | ||
| Step c Wedge an appropriate tool between the block and the rear counterweight This will hold crankshaft in it's most forward position | ||
| Step A1 Tighten the bolts marked A1 in the illustration in the order shown | 45 | |
| Step A2 Tighten the bolts marked A2 in the illustration in the order shown | 85 | |
| Step A3 Tighten the bolts marked A3 in the illustration in the order shown | 40 | |
| Crankshaft Windage Tray | 95 |