Fuel Filter: Service and Repair

Fuel Filter:

The fuel filter mounts to the frame below the front of the fuel tank.

REMOVAL

1. Disconnect positive battery cable at the PDC.

2. Release fuel system pressure. Refer to Fuel Pressure Release Procedure.

3. Remove fuel tubes from fuel filter. Refer to Quick- Connect Fittings and Fuel tubes in the Fuel Delivery.

4. Remove fuel filter mounting bolt. Remove filter from clamp.

INSTALLATION

1. Install filter into clamp.

2. Position filter on frame rail. Install mounting bolt.

3. Install fuel tubes to filter. Refer to Quick-Connect Fittings and Fuel tubes.

4. Connect positive battery cable at the PDC.

CAUTION: When using the ASD Fuel System Test, the ASD relay and fuel pump relay remain energized for 7 minutes or until the test is stopped, or until the ignition switch is turned to the Off position.

5. Use the DRB Scan Tool ASD Fuel System Test to pressurize the fuel system. Check for leaks.